Home page

+

JNM-BT High-efficiency Penetrant

JNM-BT is a highly efficient penetrant for treating cotton, linen, viscose, and their blended fabrics. Treated fabrics can be bleached or dyed directly without boiling. It can improve dyeing defects caused by dead cotton, and the dyed fabrics are softer and fuller. When bleaching and dyeing gray fabrics, it is best to remove the dye first to ensure penetration.

Huzhou U-CAN Biotechnology Co. Ltd

Product Category:

Product Center

Preprocessing series

Product Message

Product Recommendation

Product Overview

JNM-BT is a highly effective penetrating agent for treating cotton, linen, viscose, and their blended fabrics. Treated fabrics can be bleached or dyed directly without boiling; it can improve dyeing defects caused by dead cotton, and the dyed fabric feels softer and fuller. When scouring and bleaching gray fabrics, it is best to remove the dye beforehand to ensure penetration.
The penetration effect is best below 40℃. At high temperatures, it is easily hydrolyzed when encountering alkali, so it is suitable to treat the fabric with the penetrating agent below 40℃ before raising the temperature.

Product Features and Advantages

It has good wetting, penetration, emulsification, and foaming properties.

It can quickly and evenly penetrate into the fiber interior.

It is not resistant to strong acids, strong alkalis, heavy metal salts, and reducing agents.

Basic Properties
Appearance	Ionicity	PH value	Solubility
Colorless to light yellow, low viscosity liquid	Anionic	4.0～7.0 (1% aqueous solution)	Completely soluble in water

Application Range

Pre-treatment of cotton, linen, chemical fiber, wool, Tencel and other interwoven and blended fabrics, desizing, oxygen bleaching, etc.

Post-treatment after softening

Application Range

Pre-treatment of cotton, linen, chemical fiber, wool, Tencel and other interwoven and blended fabrics, desizing, oxygen bleaching, etc.

Post-treatment after softening

Keywords:

JNM-BT High-efficiency Penetrant

Previous page

JNM-E Oxygen Bleaching Stabilizer

JNM-TT Release Agent

Next page

Previous page

JNM-E Oxygen Bleaching Stabilizer

Next page

JNM-TT Release Agent

Contact Us

Contact Number

+86-18157256898

Contact Email

Contact Address

No.1, Gaoxin Road, Gaoxin Technology Industrial Park, A Building, Wuxing District, Huzhou City, Zhejiang Province

Product Recommendation

JNM-1 Bioenzyme

JNM-1 Bioenzyme

JNM-1 Bioenzyme is a highly efficient enzyme strain carefully screened and cultivated through solid-state fermentation. It not only effectively removes starch slurry but is also suitable for degrading other chemical slurries such as PVA.

JNM-2 Compound Enzyme

JNM-2 Compound Enzyme

JNM-2 compound enzyme is an enzyme preparation with strong slurry, pectin removal and lignin decomposition capabilities. It can decompose slurry, pectin, lignin, cottonseed hulls, etc. on fabrics, making them easily and thoroughly removed in the subsequent washing process.

JNM-3 Cellulase

JNM-3 Cellulase

JNM-3 Cellulase is a liquid enzyme preparation, a cellulase obtained from fungi through deep fermentation and extraction processes. Its main function is to degrade cellulose by destroying its structure, hydrolyzing the cellulose on the fabric.

JNM-5 Xylanase

JNM-5 Xylanase is a liquid enzyme preparation obtained from non-pathogenic bacteria through internal induction. It is a xylanase obtained from bacteria through fermentation and extraction processes. It can be used alone or in combination with related enzymes. It is an enzyme with a good hydrolytic effect on hemicellulose and can be used in the finishing of flax and ramie fabrics and other fabrics containing hemicellulose.

JNM-6 Deoxyribonuclease

JNM-6 Deoxyribonuclease

JNM-6 catalase is an industrial-grade, high-concentration liquid catalase that efficiently decomposes hydrogen peroxide into oxygen and water. This product only acts on hydrogen peroxide and is completely biodegradable.

JNM-D102 Fluffy Softener

JNM-D102 Fluffy Softener

JNM-D102 is a new type of material, a special fluffy softener, which is a multi-copolymer. Under alkaline conditions, it has better stability than traditional silicone emulsions at high temperatures, and better anion resistance than traditional silicone emulsions at high temperatures.

JNM-D109

JNM-D109 flax-specific softener is made from pure biological and environmentally friendly products. It has stronger penetration and dispersion performance, and can significantly improve the fluffiness and softness of the fiber; This product is mainly used in the degumming and conditioning processes of flax fibers to improve fiber rigidity, improve fiber separation, feel, without damaging fiber strength, improve spinnability, etc., and does not contain APEO.

JNM-D101 Brightening Smoother

JNM-D101 Brightening Smoother

JNM-D101 brightener is a new type of material made of multiple polymers, a kind of macromolecular brightener. Under alkaline conditions, it has better stability than traditional silicone emulsions in terms of temperature resistance. Under high-temperature conditions, it has better stability than traditional silicone emulsions in terms of anion resistance.

JNM-D15 Emulsified Oil

JNM-D15 Emulsified Oil

JNM-D15 emulsified oil is a new type of compound product, compounded by block emulsified oil, fatty amide derivatives and other surfactants through a special process to meet special requirements; it overcomes the shortcomings of ordinary hemp oil, such as poor stability, hydrophobicity, and easy silicon spot formation; this product has good compatibility, good compatibility with other surfactants, and is APEO-free.

JNM-D4 Soft lubricating oil

JNM-D4 Soft lubricating oil

JNM-D4 soft lubricating oil is replicated using pure biological and environmentally friendly products, with stronger penetration and dispersion performance; it can significantly improve the fluffiness and softness of fibers; this product is mainly used in the conditioning process of hemp fibers, and it can improve fiber separation, feel, and does not damage fiber strength, etc., and does not contain APEO.

JNM-D3 emulsion oil

JNM-D3 emulsion oil

JNM-D3 emulsified oil is an emulsion emulsified from hydrophilic block silicone oil, which is a silicone, polyamine, polyether ternary block copolymer. It overcomes the shortcomings of ordinary silicone oil, such as poor stability, hydrophobicity, and easy silicone spotting. It can improve fiber separation, feel, and does not damage fiber strength, and does not contain APEO.

JNM-PT intensifier

JNM-PT intensifier

JNM-PT intensifier is made from acrylic monomers through emulsion polymerization. It is mainly used for deepening the color and adjusting the gloss of dyed fabrics such as cotton, man-made cotton, polyester cotton, and nylon cotton, solving the problems of insufficient dyeing depth or inability to dye black.

JNM-HG raising agent

JNM-HG raising agent

JNM-HG raising agent is a specially processed silicone emulsion. It can be used for raising, fuzzing, and brushing of fabrics such as all-cotton, T/C, polyester, and nylon. The product is environmentally friendly and does not contain APEO.

JNM-SA stiffening agent

JNM-SA stiffening agent

JNM-SA stiffening agent is synthesized from vinyl acetate polymer; used for stiffening, elasticity and thickening finishing of fabrics; recommended for stiffening finishing of cotton, cotton and polyester blended fabrics, garments, garment linings, toys and curtain fabrics.

JNM-KD Antistatic Agent

JNM-KD Antistatic Agent

JNM-KD antistatic agent is a compound of water-dispersible polyester and polymer, used for durable moisture-absorbing and antistatic finishing of polyester and other synthetic fibers. It crosslinks and grafts with the water-repellent surface molecules of polyester and other synthetic fibers, thereby grafting hydrophilic groups onto the fiber surface to impart durable moisture absorption and antistatic properties to synthetic fiber fabrics.

JNM-UV UV resistance improver

JNM-UV UV resistance improver

JNM-UV sunfastness improver is composed of heterocyclic compounds and is suitable for improving the sunfastness of various natural and chemical fibers.

JNM-208 Scald-proof fiber protectant

JNM-208 Scald-proof fiber protectant

JNM-208 Non-iron fiber protectant is a polymer blend polyethylene copolymer product, a special surfactant and unique formula through high-pressure fusion into an emulsion. Mainly used for cotton, polyester, polyester cotton, medium and long fiber fabrics, smooth, wrinkle-resistant finishing. Especially improve the sewability of fabrics, prevent needle holes.

JNM-AR formaldehyde-free wrinkle-free resin

JNM-AR formaldehyde-free wrinkle-free resin

JNM-AR formaldehyde-free wrinkle-free resin is a formaldehyde-free finishing agent. It is suitable for pure cotton fabrics and cotton blended knitted and woven fabrics for ultra-low formaldehyde wrinkle-resistant and shrink-resistant finishing, and also for wrinkle-resistant treatment of regenerated fibers such as linen and viscose.

JNM-WS Wet Rubbing Fastness Enhancer

JNM-WS Wet Rubbing Fastness Enhancer

JNM-WS wet rub fastness improver is composed of water-based polyester polymers and is used to improve the wet rub fastness of fabrics dyed or printed with reactive, direct, sulfur, and neutral dyes.

JNM-C8 Carbon 8 Waterproofing Agent

JNM-C8 Carbon 8 Waterproofing Agent

JNM-C8 Carbon 8 waterproof agent is a high-concentration fluorine-based finishing agent. Fabrics treated with it exhibit durable, high-level waterproof and oil-repellent properties and meet the following standards: waterproof AATCC22, oil-repellent AATCC118, etc.

JNM-C6 Carbon 6 waterproof agent

JNM-C6 Carbon 6 waterproof agent

JNM-C6 carbon 6 waterproof agent is composed of multiple chemical components such as silicon dioxide and fluoroalkane. Silicon dioxide is an inorganic compound with extremely high wear resistance, compressive strength and corrosion resistance; fluoroalkane is an organic compound with excellent waterproofness, high temperature resistance and chemical stability.

JNM-C0 fluorinated waterproof agent

JNM-C0 fluorinated waterproof agent

JNM-C0 fluorocarbon-free waterproof agent is a high-performance, fluorocarbon-free permanent waterproof agent based on an acrylic polymer emulsion.

JNM-D5 imitation Tencel feel finishing agent

JNM-D5 imitation Tencel feel finishing agent

JNM-D5 imitation Tencel feel softener is an emulsion made from fluffy segmented silicone oil crude oil, which is a silicone oxygen, polyamine, polyether ternary segmented copolymer. It has a crisp and smooth feel like real silk and will not affect the follow-up dyeing and finishing processes. It is APEO-free.

JNM-BF Ice-feeling silicone oil

JNM-BF Ice-feeling silicone oil

JNM-BF ice-feeling silicone oil is an emulsion further modified from hydrophilic block silicone oil for all-cotton fabrics. It provides a cool feeling on all-cotton fabrics, has excellent hydrophilicity, superior stability, and can withstand harsh processing conditions.

JNM-FA Fluffing agent

JNM-FA Fluffing agent

JNM-FA Bulking Agent is a silicone-amine resin emulsion synthesized by a special polymerization process using a novel polyamine of (AB)n and a polyether block silicone oil. It is suitable for various fiber fabrics, especially cotton, polyester-cotton blends, and plush fabrics of various blends, giving fabrics a fluffy, soft, and lively feel. When applied to cotton knitted fabrics, it provides a bouncy, water-repellent, and soft feel; when applied to polyester and its fabrics, it provides an ultra-soft and fluffy, oily feel.

JNM-D2 Fabric Softener

JNM-D2 Fabric Softener

JNM-D2 softener is a segmented emulsified oil composed of a silicone-oxygen, polyamine, and polyether ternary block copolymer, which imparts softness, fluffiness, fullness, smoothness, and a natural feel to the fabric. It offers excellent compatibility, works well with other surfactants, and is free from APEO. Choose this fabric softener to provide your clothes with even more refined care, making every piece of clothing a warm companion in your life. Soft, fragrant, and caring, it fills every day with comfort and ease.

JNM-D1 hydrophilic silicone oil

JNM-D1 hydrophilic silicone oil

JNM-D1 hydrophilic silicone oil is replicated using pure biological and environmentally friendly products. It has stronger penetration and dispersion performance, can significantly improve the smoothness and fluffiness of fibers, does not damage the fiber strength, and will not affect the subsequent dyeing and finishing processes; it is environmentally friendly and does not contain APEO.

JNM-D hydrophilic softener

JNM-D hydrophilic softener

JNM-D hydrophilic softener has stronger hydrophilic, penetration, and dispersion properties. It can significantly improve the fluffiness and softness of fibers without damaging fiber strength and does not contain APEO.

JNM-FQ Cuilan color fixer

JNM-FQ Cuilan color fixer

JNM-FQ Cuilan color fixative is suitable for post-treating cellulose reactive and direct dyed fabrics or printed fabrics using dipping or padding methods; it significantly improves the wet fastness of water stains after dyeing and printing cotton, linen, wool, silk, etc.; it is also used for cationic color fixation in nylon or nylon-cotton double fixation; and improves the chlorine (chlorine) fastness of cotton and wool fabrics.

JNM-TA Consolidation Agent

JNM-TA Consolidation Agent

JNM-TA stripping agent can be used as a stripping agent for color fixatives and also as a masking agent. It can easily remove color fixatives from fabrics without affecting the color and lightfastness of re-dyeing.

JNM-BC bath anti-wrinkle finishing agent

JNM-BC bath anti-wrinkle finishing agent

JNM-BC wrinkle-resistant finishing agent for bath is suitable for wrinkle-resistant finishing in dyeing bath and wet processing bath of synthetic fiber and its blended fabrics. Added to the dyeing bath, it effectively reduces the friction between fabrics and fabrics, and between fabrics and dyeing tanks, preventing wrinkles and scratches during fabric processing, as well as dyeing stains caused by these wrinkles, resulting in high-quality processed products.

JNM-CT Cleaning Agent

JNM-CT Cleaning Agent

JNM-CT cleaning agent uses SOLVAY's patented ethoxylation technology, which has stronger cleaning, emulsification, and dispersion functions. It also has good biocompatibility, good compatibility with other surfactants, is environmentally friendly, and does not contain APEO.

JNM-HL Leveling Agent

JNM-HL Leveling Agent

JNM-HL leveling agent is a novel disperse leveling agent developed using environmentally friendly raw materials. This product has excellent salt resistance, dispersibility, migration, retarding property, leveling property, and low foaming properties. It has a high dyeing rate, is easy to color, has good color reproducibility, and is suitable for dyeing applications in various colors from light to dark.

JNM-DA degreaser

JNM-DA degreaser

JNM-DA degreasing agent is a multifunctional pretreatment auxiliary agent, mainly used in the pretreatment process of polyester, nylon and their blended fabrics. It can effectively remove grease, wax and machine oil stains contaminated during weaving, as well as oil agents from previous spinning and spinning processes, and contamination during storage and transportation.

JNM-FR1 Defoamer

JNM-FR1 Defoamer

JNM-FR1 defoamer is an organosilicon emulsion, which is a weak anion. It is generally used in the pre-treatment and wet processing of dyeing. This product can prevent or eliminate foam.

JNM-FR defoamer

JNM-FR defoamer

JNM-FR defoamer is composed of polyorganosiloxane, special high-efficiency emulsifiers and stabilizers, etc. It has good compatibility with foaming media, fast defoaming speed, excellent foam suppression performance, and is easily dispersed in water.

JNM-AF chelating dispersant

JNM-AF chelating dispersant

JNM-AF chelating dispersant can form complexes with multivalent metal ions, blocking the adverse effects of these metal ions on dyeing and finishing processes, and does not affect the metal ions in the dye structure; it has excellent dispersing properties, can remove calcium soap deposits on fabrics and equipment, and prevent and remove scale.

JNM-TF low-temperature oxygen bleaching stabilizer

JNM-TF low-temperature oxygen bleaching stabilizer

JNM-TF low-temperature oxygen bleaching stabilizer is a multifunctional oxygen bleaching and refining agent for natural cellulosic fibers such as flax and cotton. It can impart good whiteness and softness to cellulosic fibers such as cotton and flax, and effectively protect fiber strength. This product has good compatibility, good compatibility with other surfactants, is environmentally friendly, and does not contain APEO.

JNM-E Oxygen Bleaching Stabilizer

JNM-E Oxygen Bleaching Stabilizer

JMN-E oxygen bleaching stabilizer is an excellent and efficient stabilizer. It has strong chelating, dispersing, and scale-inhibiting functions. It has an excellent stabilizing effect on hydrogen peroxide and can maximize the control of the decomposition rate of hydrogen peroxide. It has good alkali resistance and high-temperature resistance, and causes less fiber damage. It is a non-silicon product, and in terms of stabilization effect, it is comparable to the stabilization effect of foamed alkali, and it is extremely convenient to use.

JNM-BT High-efficiency Penetrant

JNM-BT High-efficiency Penetrant

JNM-BT is a highly efficient penetrant for treating cotton, linen, viscose, and their blended fabrics. Treated fabrics can be bleached or dyed directly without boiling. It can improve dyeing defects caused by dead cotton, and the dyed fabrics are softer and fuller. When bleaching and dyeing gray fabrics, it is best to remove the dye first to ensure penetration.

Product Message

Please contact us to provide you with satisfactory products and become a reliable supplier and service provider in the industry

Home
About Us
- Company Introduction
- Honors and Qualifications
Business
Blog
- Company News
- Industry News
Contact Us
Contact
Add:No. 1 Industrial Road, High-Tech Zone, Wuxing District, Huzhou City, Zhejiang Province, Building A, High-Tech Industrial Park
Tel:+86-18157256898
Wechat:+86-13511270683
E-mail:Led@mizuda.net

Copyright © 2025 Huzhou U-CAN Biotechnology Co. Ltd

浙ICP备2024099834号-3

Tel：+86-18157256898

E-mail：Led@mizuda.net